Vehicle Blind Spot
Anytime you’re changing lanes or merging, you’ll want to check for any car blind spots in your driver view first. Flip on your turn signal to let other cars know you’ll be moving over, and check your rear mirrors and side car mirrors. Finally, you’ll .
While driving, there are a number of spots which a driver cannot see. Studies have revealed that a driver experiences 8 blind spots in total; 2 each on all four sides of the car i.e. front, rear, left side and right side. Numerous road accidents occur as a of these blind spots.
The definition of a blind spot is an area around your vehicle that you, the driver, cannot observe, through the use of their mirrors or cameras, without turning their head and therefore taking their eyes off the road. Nearly all vehicles have at least one blind spot, be it your car, a truck, a boat or even a politedriving.comted Reading Time: 4 mins.
Blind Spot in Your Eye? Possible Causes and What to Do
Blind spot checks are an essential aspect of every day driving. Whether you’re making a lane change, a left turn, a right turn, or even curbside parking, you are always going to need to check your blind spots if you want to avoid an accident. Also, you need to make sure to do them properly on your DMV Drive Test, so your examiner doesn’t fail you.
Driving Blind Spot
Blind spots may occur in the front of the driver when the A-pillar also called the windshield pillar , side-view mirror , or interior rear-view mirror block a driver’s view of the road. Behind the driver, cargo, headrests, and additional pillars may reduce visibility.
Proper adjustment of mirrors and the use of other technical solutions can eliminate or alleviate vehicle blind spots. A no zone is one of several areas around a large truck, where the truck driver cannot see. Adjusting mirrors to end side blind spots[ edit ] If the side view mirrors of a car are adjusted in a particular way, there is no blind spot on the sides.
It is reputed to be a lifesaver. The area directly behind vehicles is the source of back-up collisions , particularly involving pedestrians, children, and objects directly aft of a vehicle. That area has been called a "killing zone". A similar problem attaches to positions left and right of a vehicles’ rear bumper as the driver attempts to back out of a parking space.
Specially designed cross traffic alert warning systems have been developed to address these. Vehicles in the adjacent lanes of the road that fall into these blind spots may not be visible using only the car’s mirrors. This diagram shows the blocked view in a horizontal-plane in front of the driver. The front-end blind spots caused by this can create problems in traffic situations, such as in roundabouts , intersections , and road crossings.
The angle between the horizon and A-pillar is approximately 40 degrees with a straight pillar that is not too thick. This gives the car a strong, aerodynamic body with an adequately sized front door. Vertical A-pillar having small blind spots Panoramic vertical A-pillars[ edit ] The sides of a panoramic windshield are curved, which makes it possible to design vertical A-pillars that give the driver maximum forward visibility.